The heart of the MELARCON is its mainboard. It serves as a PLC, HMI and gateway to connect to SolidBlue.
A 24V DC switching power supply with 45W is already integrated on the mainboard and thus enables direct connection to the supply network. With a power supply range of 100-240V AC 50/60 Hz, the MELARECON is also ready for use internationally. A suitable DIN rail housing enables direct installation in the control cabinet assembly.
The MELARECON offers a variety of connections for network, I/O modules, bus systems and tapping the voltages generated on the board. Bus terminating resistors can be activated on the board using DIP switches.
Power supplay | 110-240V AC 50/60 Hz 1A secured |
Voltages on board | 24V DC 45W, 12V DC und 5V DC |
Digital inputs | 32x (via 2x 20-pin flat cable sockets) |
Digital outputs | 48x 24V DC 0,5W(via 2x 20-pin flat cable sockets) |
Analog inputs | 4x ADC (via 2x 20-pin flat cable sockets) |
Analog outputs | 4x PWM (via 20-pin flat cable sockets) |
Ethernet | 1x Gigabit with IEEE 1588 |
USB 2.0 | 2x Host, 1x OTG |
CAN | 1x CANopen Master, 1x CANopen Node |
RS485 | 1x |
RS232 | 1x |
Micro SD | 1x |
LVDS | 1x |
HDMI | 1x |
RTC on board | 1x |
Watchdog | 2x Hardware watchdog (1x on Chip, 1x on I²C) |
Dimensions module | Width: 300mm x Height: 135mm |
Dimensions DIN rail housing | Width: 305mm x Height: 140mm |
You might also be interested in:
MELARECON products
An overview of all MELARECON products.
Embedded software design
The all-round carefree package. We would be happy to develop your automation solution.